New Bike Assembly Instructions | Kids’ Bike Setup Guide

Frog Bikes founders Jerry and Shelley Lawson

Welcome to the Frog Family!

Congratulations on choosing a Frog bike, the perfect companion for your child's cycling adventures.

At Frog Bikes, we take immense pride in our commitment to creating exceptional bicycles that are not only fun to ride but also safe and durable. Our journey began with a vision to provide children with bikes that are thoughtfully designed.

Follow our simple assembly guide below and don't forget to register your bike for the extended 10-year warranty!

Jerry & Shelley Lawson

Co-founders of Frog Bikes

Step 1: Before You Start

Everything you need to know for a smooth assembly

Tools Included

5mm Allen key
15mm Spanner

Assembly Time

Quick and easy assembly in just 10-15 minutes with our step-by-step guide

Step 2: Unbox Your New Bike

Let's start your cycling journey!

Careful Unboxing

Unboxing your new bike is an exciting moment! Take care during this process:

Open the box carefully to avoid scratching the bike
Remove all packaging materials
Check for any included accessories
Recycle packaging responsibly with your local authority

Let's contribute to keeping our planet green and clean!

Step 3: Install Accessories

Add safety and functional accessories

Attach Your Accessories

Check the box contents for accessories and install them:

Reflectors for safety
Bell for alerting pedestrians
Mudguards (if included)

Use the provided brackets, screws, and attachments. For mudguard installation help, view our detailed manuals.

Step 4: Align & Tighten Handlebars

Ensure perfect steering alignment

Check the sticker on the fork to ensure proper forward orientation

Loosen the two allen bolts securing the handlebar stem (one full turn)

Hold wheel between knees and rotate handlebars until perfectly straight

Tighten both stem bolts hand-tight. Do not over-tighten

Perfect Alignment

Proper handlebar alignment is crucial for safe steering and stability:

Check the forward-pointing sticker on the forks
Loosen stem bolts just enough to move handlebars
Ensure handlebars are perfectly straight
Tighten bolts securely but don't over-tighten
Test by holding wheel and turning handlebars

Step 5: Attach Pedals

Secure the pedals for safe cycling

Identify correct pedals - red pedal goes into red crank on the left

Peel up the sticker on the crank to reveal the threaded hole

Align and gently rotate pedal by hand until threads engage properly

Use spanner to tighten quarter turn. Do not over-tighten

Correct Pedal Installation

Proper pedal installation is crucial to avoid damage:

Match left pedal (red) with left crank (red)
Match right pedal with right crank
Remove protective stickers from crank threads
Thread pedals by hand first to avoid cross-threading
Use spanner only for final tightening
Repeat process for both pedals

Important: Never force pedals or over-tighten to prevent thread damage

Step 6: Adjust Saddle Height

Find the perfect riding position

Find the Perfect Height

Proper saddle height ensures comfort and safety:

For beginners: Feet should be flat on the ground
For confident riders: On tip-toes is acceptable
Never exceed the maximum height marking
Ensure the saddle is level and secure

Safety Note: The saddle must not be raised higher than the maximum marking to ensure rider safety

Step 7: Check Brake Operation

Ensure safe and reliable braking

Ensure Safe Braking

Proper brake function is essential for safety:

Squeeze brake levers - they should feel firm
Levers should not pull all the way to the handlebars
Adjust using barrel adjusters on brake levers if needed
Ensure handlebars are straight and aligned
Test both front and rear brakes

For detailed brake adjustments, consult the Owner's Manual.

🎉
Congratulations, amazing work!

You've successfully assembled your new Frog bike
and it's ready for your first adventure with it!

Gear up safely, then get ready to roll!

Now all that is left to do is strap on your helmet, hop on your bike, and pedal into a world of adventure. Before your first ride, take a moment to make sure everything fits comfortably. Need help? Check out our Bike Helmet Fitting Guide for tips. Safety first, fun always!

Protect Your Investment
Register Your FREE 10-Year Warranty

Complete your registration within 30 days of purchase to activate your industry-leading warranty coverage.

1

Find Serial Number Located on the bottom of your bike frame

2

Register Online Click the button below to get started

3

Enter Details Fill in your bike and contact information

4

Save Confirmation Keep your registration confirmation safe

Register Your FREE 10-Year Warranty

Takes less than 2 minutes - protect your investment today!

New Bike Instructions

Frog Bike Assembly Instructions